Climax SHARK FIN DEFENDER, Руководство по эксплуатации

Страница: 26 / 62

Page 14 Defender Clamshell Operating Manual
T
IP
:
The tool slide may be installed already, but it is easier to mount the
guards before mounting the tool slide.
2. Check that the pneumatic conditioning unit (PCU) E-Stop is in the off posi-
tion, and that the regulator is set to minimum.
3. To determine which screws on the clamshell body need to be replaced, line
up the guards with the clamshell. The parts must align with the split line of
the clamshell, and one guard has a cutout for the motor.
4. Remove the screws identified for replacement and set them aside. They
will be needed for machine disassembly after operation.
5. Mount the guards to the clamshell, making sure to align the face of the
guard with the face of the motor cover.
NOTICE
If the guard is not properly
positioned, it might rub
against the tool slide and
cause damage to the guard.
T
ABLE
3-1. G
UARD MOTOR AND COVER
IDENTIFICATION
Number Component
1 Guard
2 Motor cover
GUARD
MOTOR COVER
1
2
F
IGURE
3-1. G
UARD AND MOTOR COVER