Climax SHARK FIN DEFENDER, Руководство по эксплуатации

Страница: 27 / 62

P/N 97475, Rev. 2 Page 15
6. If using a 7" (178 mm) or
10" (254 mm) tripper post,
install the Shark Fin™
guard assembly onto the
tripper post. The Shark
Fin™ should be installed as
close to the tripper rocker
as possible for proper fit.
Note that 4" (102 mm) trip-
pers do not need the addi-
tional fin assembly.
3.3 C
ONNECTING THE
PCU
Do the following to connect the PCU:
1. Check that the lock out valve on the PCU is in the closed position.
2. Connect an air hose from the air supply with 90 psi (6 bar) pressure using a
minimum 0.5" (12 mm) air hose.
3. Connect the air hose from the clamshell air motor to the outlet of the PCU.
4. Connect the pneumatic
cable from the PCU to the
operator pendant (see Fig-
ure 3-3).
T
ABLE
3-2. T
RIPPER POST AND FIN
IDENTIFICATION
Number Component
1 Tripper post
2 Shark Fin™
FIN
TRIPPER
POST
1
2
F
IGURE
3-2. T
RIPPER POST AND
S
HARK
F
IN
™
T
ABLE
3-3. PCU
CONNECTION
IDENTIFICATION
Number Component
1
Pneumatic cylinder
connection
2
Operator pendant con-
nection
OPERATOR
PENDANT
CONNECTION
PNEUMATIC
CYLINDER
CONNECTION
1
2
F
IGURE
3-3. PCU
CONNECTIONS