Climax FF4000, Руководство по эксплуатации

Страница: 17 / 50

P/N 35425, Rev. 2 Page 9
Recommended tools
Climax includes a general tool kit for use in operating the machine. Additionally, you
may require other items of equipment specific to your job-site and particular setup.
Supplied with the machine:
Dead blow hammer
Spanner wrench
Hex key wrench set
Other tools you could have on hand:
Pliers for pulling chips away from the machine.
Chip brush
Cutting oil
File
Honing stone
Precision instruments
In most cases, this machine can be setup using basic measuring devices such as a
steel rule or tape measure. Should greater precision be required, some or all of the
following may be useful:
Dial or digital calipers
ID calipers
Machinist’s precision level
Micrometers
Dial indicator