Climax FF4000, Руководство по эксплуатации

Страница: 21 / 50

P/N 35425, Rev. 2 Page 13
Mounting the machine
CAUTION
To avoid damage to the clamp blades, be sure the
machine is mounted far enough inside the work
piece to clear the cutters.
•
Turn the star-shaped draw-rod knob counterclockwise to secure the blades
inward.
•
Install the machine in the pipe/tube end, and turn the draw rod knob clockwise
to spread the clamp blades in the bore.
•
To center and secure the machine, gently work the tool back and forth while
tightening the draw rod knob (clockwise).
•
For final tightening, push the draw rod knob into the feed handle and use the
added leverage to tighten the chuck.
CAUTION
Machine is NOT securely clamped until draw rod
knob is pushed into the feed handle and turned for
final tightening.