Clifford BlackJax 5, Руководство по установке

Страница: 9 / 23

© 2005 directed electronics—all rights reserved
9
H2/5–red/white battery positive (20-amp fuse) 12V (+) input
Connects to the vehicle’s positive battery terminal using the 20-amp fuse holder.
H2/6–black/gray (-) rpm input
This wire monitors the RPM of the vehicle by the BlackJax control. Connect this wire
to the vehicle coil’s negative side or the non-common fuel injector wire.
H2/7–violet system status LED
Connects to the Status LED indicator.
H2/8–red battery positive (5-amp fuse) 12V (+) input
Connects to the vehicle’s positive battery terminal using the 5-amp fuse holder.
H2/9–black (-) ground
H2/10–blue/white (+) brake light input/output
Connects to the brake light circuit. This initiates BlackJax countdown to activation after
a door has been opened/closed. Also when BlackJax is activated, it flashes the brake
lights to warn motorists behind the vehicle.
blackjax installation
IIM MPPO ORRTTA AN NTT!! Do not use any testing tool other than a digital multi-meter to prevent
costly damage to the vehicle. Use of a test light may cause grounding of sensitive elec-
trical components that can damage the on-board vehicle computer and processors
resulting in substantial cost for replacement.
control unit
Select an area behind the dash to mount the control unit, but do not permanently affix
it until all wiring and testing is complete.