© 2005 directed electronics—all rights reserved
17
4.
After entering the code, press and hold the
for about 3 seconds until you
hear one siren chirp and the LED turns on to acknowledge program mode entry.
The system is now in the “Feature Select” position for User-Programmable
Features.
5.
Select the feature column: Press the unmarked button once. Pause. You will then
hear one chirp.
6.
Within five seconds, select the feature row: Press and release the
button the
same number of times as the feature’s row number. You’ll hear a chirp each time
you press the unmarked side to help you count.
7.
If there is a NOTE for the selected feature, perform the actions noted.
8.
Pause. You will hear either one or two chirps: Two chirps = ON, one chirp = OFF.
9.
You can select another feature, or you can exit program mode:
a.
To start over, repeat step 6 within the next five seconds (after five seconds,
three chirps indicat e that the system is now back in the “Feature Select”
position).
b.
To select a different feature column, repeat step 5.
c.
To exit program mode, turn the ignition off (you’ll hear three chirps and the
LED will turn off to indicate exit of program mode), or wait 60 seconds and
the system will automatically exit program mode.
For example: while the ignition is “ON,” choose the feature you want to change and
enter program mode. Select the feature’s column and row, wait for the on/off chirp
confirmation, then turn off the ignition
user-programmable features (1 chirp=off, 2 chirps=on)
Feature Select Description
*1
Not used
*2
Not used
*3
Not used
*4
Siren duration (3
30
0/60/90) (1
1 cchhiirrpp/2 chirps/3chirps)
*5
Not used
*6
Passive Immobilization (On/O
Offff)
*7
Valet Code–should only be programmed by vehicle owner
Содержание BlackJax 5
Страница 4: ...www directed com 4...
Страница 23: ...2005 directed electronics all rights reserved 23...
