Clevo W860CU, Руководство пользователя

Страница: 172 / 290

Modules & Options
7 - 64 Setting Up SATA RAID or AHCI Modes
7
10. This will now return to the main menu.
11. Select 6.Exit and press Enter, then press Y to exit the RAID configuration menu.
12. As the computer starts up, press a key when you see the message " Press any
key to boot from CD ".
13. Press Enter to continue installing the operating system as normal (see your
Windows documentation if you need help on installing the Windows OS).
14. Install the Windows drivers from the Device Drivers & Uti User’s Manual
disc as per Table 4 - 1, on page 4 - 3 .
15. After installing all the necessary system drivers you need to install the Intel Matrix
driver (see “Intel Matrix Driver Installation” on page 7 - 65 ).
Figure 7 - 53
RAID Created
RAID Volumes:
ID
Name Level Strip Size Status Bootable
0 MyRAID RAID1(Mirror) N/A 111.8GB Normal Yes
Physical Disks:
Port Drive Model
Serial # Size Type/Status(Vol ID)
0 FUJITSU MHY2120B K404T812PPG5 111.7GB Member Disk(0)
4 FUJITSU MHY2120B K404T7C2KJKJ 111.7GB Member Disk(0)
Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1021
Copyright (C) 2003-09 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]
[ ]-
Select [ESC]-Exit [ENTER]-Select Menu
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume 5. Acceleration Options
3. Reset Disks to Non-RAID 6. Exit