manualshive.com logo in svg

Clevo W550SU2, Руководство пользователя, Страница: 193 / 256

Поделиться
Скачать
Clevo W550SU2 Скачать руководство пользователя страница 193

Modules & Options

3G Module 7 - 51

7

3G Module USIM Card Installation

Follow the instructions below to install the USIM card (which will be provided by
your service provider).

1.

Turn 

off

 the computer, and turn it over.

2.

Slide the latch 

 in the direction of the arrow.

3.

Slide the latch 

 in the direction of the arrow, and hold it in place.

4.

Remove the battery 

.

5.

Insert the USIM card 

 (at the rear of the battery compartment) as illustrated 

below until it clicks fully into position, and replace the battery.

Power Safety 

Warning

Before you undertake any
installation procedures,
make sure that you have
turned off the power, and
disconnected all peripher-
als and cables (including
telephone lines). It is advis-
able to also remove your
battery in order to prevent
accidentally turning the ma-
chine on.

USIM Card Orientation

Note that the USIM card’s
readable side (with the
gold-colored contacts)
should face upwards as il-
lustrated.

Figure 7 - 42

Battery Removal & 

USIM Card Insertion

1
2

3

4

2

1

3

4

Содержание W550SU2

































































































































































































































































Отзывы:

Нет отзывов