Clevo M570TU, Руководство пользователя

Страница: 87 / 246

BIOS Utilities
Advanced Menu 5 - 9
5
SATA Mode Selection (Advanced Menu)
This menu is only available if you select the Vista O/S as your operating system.
You can configure SATA (Serial ATA) control to operate in either IDE (native/
compatible) or AHCI (Advanced Host Controller Interface) modes from this menu.
The SATA mode should be set to AHCI mode for this system (unless you are sure
your hard disk can only operate in IDE mode). If you are unsure of the mode your
hard disk supports contact your service center. Note the following:
• If you have installed the Windows Vista O/S with AHCI enabled, DO NOT dis-
able it (see sidebar).
• The SATA mode should be set to AHCI if you have included an Intel Turbo
Memory (Robson) NAND flash memory card module in your purchase option.
• The SATA mode should be set to AHCI to support e-SATA port hot-swapping.
• You will need to install the Intel Matrix Storage driver (see “Intel Turbo
Memory & Matrix Storage Setup and Driver Installation” on page 7 - 47 ) to
support the e-SATA port in Windows Vista, and also if you have included Intel
Turbo Memory (Robson) NAND flash memory card module in your purchase
option.
Legacy USB Support (Advanced Menu)
Use this menu item to enable/disable the support for Legacy Universal Serial Bus.
SATA Mode
Selection
If you have installed the
Windows Vista operat-
ing system with AHCI
mode enabled (default
setting),
DO NOT dis-
able AHCI mode (if you
wish to disable AHCI
mode you will need to
reinstall the
Windows
VIsta OS).
If you have installed the
Windows Vista operat-
ing system with AHCI
mode disabled, DO
NOT enable AHCI mode
(if you wish to enable
AHCI mode you will
need to reinstall the
Windows VIsta OS).