Clevo D500E, Руководство пользователя

Страница: 119 / 168

BIOS Utilities
The Power-On Self Test (POST) 5 - 3
5
The Power-On Self Test (POST)
Each time you turn on the computer, the system takes a few seconds to con-
duct a
POST , including a quick test of the on-board RAM (memory).
As the POST proceeds, the computer will tell you if there is anything wrong.
If there is a problem which prevents the system from booting, it will display a
system summary and prompt you to run Setup.
If there are no problems, the Setup prompt will disappear and the system will
load the operating system. Once that starts, you can’t get into Setup without
rebooting.
POST Screen
1.BIOS information
2.CPU type
3.Memory status
4.HDD identification
notice
5.Enter Setup prompt
appears only during
POST
Note: The POST
screen as pictured is
for guideline purpos-
es only. The
POST
screen on your com-
puter may appear
slightly different.
PhoenixBIOS 4.0 Release 6.0
Copyright 1985 - 2003 Phoenix Technologies Ltd.
All Rights Reserved
BIOS Revision: D500E 1.00.P03_SAMSUNG
KBC/EC Firmware Revision: 1.00.04
CPU = Intel(R) Pentium(R) 4 CPU 3.06GHz
511M System RAM Passed
512K Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed
Fixed Disk 0: TOSHIBA MK2023GAS
ATAPI CD-ROM: Samsung CD-ROM SN-124
Mouse Intialized
Press <F2> to enter SETUP
2
3
1
4
5
Figure 5 - 1
POST Screen