background image

Troubleshooting

8 - 10 Problems and Possible Solutions

8

The 

system freezes

 or the screen goes

dark.

The system’s power saving features have timed-out

. Use the AC/DC adapter,

press the sleep (

Fn + F4

) key combination, or press the power button if no LEDs

are lit.

The system never goes into a 

power

saving mode

.

Power Options features are not enabled. Go to the 

Windows

 Power Options

menu and enable the features you prefer (see 

“Power-Saving States” on

page 3 - 6

). Make sure you have enabled 

Hibernate

 mode from the control

panel.

The 

Wireless LAN/Bluetooth/3.75G/

HSPA

 modules cannot be detected.

The modules are off. 

Check the LED indicator 

 and/or function key indicator

to see if the WLAN/Bluetooth/3.75G/HSPA module is on or off (see 

“LED

Indicators” on page 1 - 6

). If the LED indicator is off, then press the 

Fn + F11

(WLAN)

Fn + F12 (Bluetooth) or Fn + 

 (3.75G/HSPA)

 key combination(s)

in order to enable the modules (see 

Table 1 - 4, on page 1 - 9

).

Problem

Possible Cause - Solution

Other Keyboards

If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will
detect and enable it automatically. However special functions/hot keys unique to the system’s regular keyboard may not
work.

Содержание C4505

































































































































































































Отзывы: