Cleveland 36-CDM-16, Инструкция по установке, эксплуатации и обслуживанию

Страница: 29 / 30

Problem Possible Cause Remedy/Reference
Water leaking from bottom of cabinet. Broken or loose plumbing inside steamer
cabinet. Turn off electricity at main disconnect switch
and close water supply valve(s).
See note #1.
Water leaking from water pipes or drain
lines. Plumbing needs repair. See note #3.
Food takes too long to cook.
(Cook in perforated pans when
possible.) Not enough steam movement in
compartment. Hot water connected to
condenser line. Make proper connections. Refer to Installation
Manual.
Pans too close to the bottom of cabinet. Put pans in racks near top of cabinet.
Steam generator scale buildup. Descale steam generator with USDA approved
descaler.
Compartment overloaded with too much food. Put less food in pan. Use fewer pans.
Voltage too low for unit. See note #4.
Suggested cooking times are usually listed for
cooking at sea level. Extend cooking times for altitudes above 2500
feet.
Compartment bottom dirty with food
drippings. Juices and /or food leaking from pans Put a solid pan under perforated pans to catch
drippings, or put less food in pan.
TROUBLESHOOTING NOTES
1. If problem is inside the steamer, call an authorized
service representative. Cleveland Range will not pay for
non-warranty repair centers. For more information on
products and services, contact your nearest Authorized
Service Representative.
2. Proper installation of the Pressure Steamer is the
responsibility of the owner or installer. Refer to
Cleveland.
3. A licensed electrician should do repair to external
wiring.
4. Repairs to external wiring should be done by a licensed
electrician.
24