Cleveland CycleWerks ACE 250CC, Руководство пользователя, Страница: 53 / 57

- 51 -
Steps during storage:
For conventional battery, check electrolyte level every month. If the fluid
level is low, replenish it with distilled water. (Never use electrolyte or tap
water)
The battery should be kept clean. Corrosion may happen if the electrolyte is
splashed on the vehicle, terminal or wires. In case of corrosion, wash
immediately and if necessary, apply a coat of grease to protect the exposed
area.
When a battery has whitened plate electrodes, low power or a low fluid level
below the lower limit, the service life has been expended, replace the
battery.
Steps of returning to service
Clean the entire motorcycle.
Remove the spark plug; kick the kick start lever to allow the engine to rotate
for several turns, before reinstalling spark plug.
Reinstall battery.
Adjust the tire pressure according to the sidewall recommendation.
Lubricate all parts that require lubrication according to the manual.
Reread this manual to familiarize yourself with motorcycle operating.