Cleveland CycleWerks ACE 250CC, Руководство пользователя, Страница: 34 / 57

- 32 -
Tools:
To help you with regular
maintenance, a set of tools is
provided in the tool box on the rear
left side of the motorcycle.
Battery:
The Battery is stored inside the side
cover on the right side of the frame.
The battery for your model may be
of
conventional type or
maintenance-­‐free type, depending
on your country.
Direction for use of conventional
type battery:
Before using, fill the electrolyte to a
level between the upper and lower
limits. During use, the fluid level
must be kept between the upper
limit and lower limit.
Warning
：
Once the battery is in use, no
diluted sulfuric acid shall be added .
If the fluid level drops below the
lower limit, fill with distilled water
to the upper limit. Never use tap
water, this will destroy the battery.
Precaution
：
Never damage, clog or alter the
vent pipe for battery. Please make
sure that the vent hose is connected
to the vent fitting of battery, with
the other end kept always open and
away from parts that it can corrode.
The vent pipe and battery have to
be installed correctly for proper
function.
The polarity of battery wiring is as
follows. Connect the red wire to
positive (+) and the green wire to
negative (-­‐). Incorrectly connecting
the battery connection may damage
the charging system and battery.
Note
：
After the first 1000 km and every
3000 km, have battery cells checked
by your dealer/distributor, by using
an electrolyte hydrometer.
Safety:
The electrolyte contains a strong
acid and care should be taken so it
does not touch your skin. While
working on the battery wear eye
protection and protective clothes.