Cleveland CycleWerks ACE 250CC, Руководство пользователя, Страница: 26 / 57

- 24 -
Note!
After engine ignition, immediately release the start button, to avoid adverse
effects to the engine and starter.
If the engine is not started after 5 seconds, wait for 10 seconds before
making another attempt to prevent damaging the battery.
In case of failure to start after two or three attempts, rotate the accelerator
grip for 1/8 or 1/4 turns and try again.
A motorcycle that has not been used for a long time, and poor atomizing fuel
may result in starting difficulty. In this case, do not rotate the accelerator grip,
but attempt to start the motor again through with the electric start.
Kick starting:
Starting with the kick start lever
When the battery is discharged, the engine can be started by using the kick
start lever.
Turn the ignition switch to the ON position. Forcefully kick the kick start
lever to turn the motor and achieve ignition through this method.
Cold engine:
Put the choke lever to the highest position and press the electric start button;
After the engine is started, press the handle half way down and wait for the
engine to warm up, before putting the lever to the original position, and
completely turning the choke off. The colder it is, the longer warm-­‐up time
the engine will take.
Warm engine:
Rotate the throttle for 1/8 -­‐ 1/4 turns, and press electric start button to start
the engine. When the engine is warm, it is not necessary to use choke
system.