Cleveland CycleWerks ACE 250CC, Руководство пользователя, Страница: 15 / 57

- 13 -
the neutral position, press downs the gear lever to engage a low gear. Raise
the gear lever up to select a higher gear. The bike can’t move two or more
gears up or down in one operation. To shift from 2nd gear to 1st gear, or
from 1st gear to 2nd gear, the lever passes the neutral position but does not
stays there. To engage to neutral gear
，
stop in the middle of moving from 1
st
gear to 2
nd
gear.
Precaution!
When the transmission is in the neutral position, the neutral indicator lamp is
lit on the instrument panel. Even if the lamp is lit, be careful to release the
clutch slowly to make sure the transmission is actually in the neutral position.
When engaging into a low gear during high speed driving, slowly engagement
the clutch to avoid making a sudden increase in engine speed. Before
engaging a low gear, slow down using the brakes, to prevent unnecessary
wear of components in the transmission system.
Rear brake pedal:
Press down to apply the rear brake.
Side Stand