Cleveland CycleWerks ACE 250CC, Руководство пользователя, Страница: 28 / 57

- 26 -
to general conditions. Do not use the clutch for speed control. To
decelerate, shift to a low gear to allow the engine running in the normal
speed range.
Precaution!
The engine speed shall not be in the red range of the tachometer in any gear.
Driving on, up, or down slope:
To shift from a high gear to a low gear, control the speed in a safe speed
range before gear shifting. Otherwise, abrupt deceleration (sudden rise of
engine speed) may happen, causing internal gear impact, sever parts wear,
or overbalance of the vehicle. This causes a dangerous condition.
Inclined /Declined Surface:
When going up a steep slope, the motorcycle may decelerate due to
insufficient power. If this happens, immediately shift to a lower gear to
allow the engine running a normal power range. A gear change should be
made quickly to keep adequate forward momentum of the motorcycle.
When going down a slope, use the engine for braking, by shifting into a lower
gear. Never drive too fast down a slope! Never allow the engine to run at a
very high speed for a long time. This is also dangerous.
Deceleration / Braking:
Rotate the throttle forward to fully close the throttle. At the same time,
apply the front and rear brakes with even forces. You may also downshift
to use the engine to help slow you down.
Before the motorcycle is stopped, firmly press the clutch lever, we
recommend keeping the bike in 1
st
gear incase you need to make any sudden
moves while stopped in traffic. Neutral of course to back into a parking
spot.
Warning!
The faster the vehicle is driven, the longer the braking distance will be. Be
sure to make correct estimation of the distance between you and the vehicle