6 Glass plate steam inlet
Figure 1
/
I
Figure 2
�
Push
plug
in
hole \
j //
/
Tighten plug and
slide tube in hole
Hollow-wall plug
\
\
§8
1
�
.... _*= �, \
/\
2
/
/
I
\
\
Break off excess part
\
3
/
/
_
___-/
Adjusting screw
Hexagon socket bolt
Wall assembly bush
Figure 3
Glass assembly
�
Silecone glass profile
1)
Turn the hollow wall plug from the assembly set (fig.1) and fit the plug as described in fig.2.
2)
Place the assembly set on the tiled wall and fit the glass plate (fig.3 and 4).
If necessary cut the silicone glass profile to size along the glass assembly bush so it no longer protrudes.
SEDNA LINE 2008/05
\
/
/
26
