3 Basis
3.3 Connecting the roof elements to each other
Figure 1
(Cabin model 4 serves as example)
/
�Bodywork ring
I
I
I
\
M8x30 �
'
'---------
Detail A
/
I
\
I
J
Joining the roof elements
1)
Position the flanges of the roof parts together (fig.1 ). On the visible side of the roof parts check they are positioned
correctly with respect to each other.
Use hexagonal bolts M8x30 to connect the roof parts to each other (detail A).
2)
The connecting of the roof elements can take place from either inside or outside the cabin (depending on the available
space)
Connecting the elements from inside the cabin is preferred.
With large cabins the alternative way of connecting the roof parts is recommended.
See 3.4.2 pag.13. Roof parts are placed one by one on the cabin then positioned and bolted.
3)
Go to section 2 of the separate "Optional extras" manual if the cabin must be provided with the starry sky option.
Go to section 7 of the separate "Optional extras" manual if the cabin must be provided with speakers.
SEDNA LINE 2008/05
11
