5 Assembly wall panels
0
0
Figure 9
Frame with
steam tank
0
0
0
Figure 10
Cement all around
0
--+--_____,anel for
steam outlet
435
185-190
. I I .
D�
(Y) -
I
/ ¢13(4x)
"'
750
Figure 11
Finistiing plate
6)
The bottom wall panel at the steam outlet has an opening into which the steam tank fits (fig.9).
The beam to which the steam tank is fixed can be adjusted in height so the hole in the wall plate can be easily
positioned around steam tank. Note the turned lip on the underside of the steam tank.
0
'°
'°
After the assembly of the wall plate in the way described, the clamping bolts of the beam must be tightened on the
frame. Only then fit the upper wall plate.
7)
Seal the gap around the steam tank with polymer cement (fig.10).
8)
After tiling apply the finishing plate on the tiles with polymer cement (fig.11 ).
SEDNA LINE 2008/05
24
