S-2R + Frontanbau 11.2018 en
10
4.6 Hydraulic system, lubricants
(1) When connecting the hydraulic hoses to the tractor hydraulics, make sure that the
hydraulic system is depressurized on both the tractor and the implement side!
(2) Check hydraulic hose lines regularly and replace if damaged or aged! The replacement
hose lines must meet the technical requirements of the device manufacturer!
(3) Liquids escaping under high pressure (hydraulic oil) can penetrate the skin and cause
severe injuries that are not visible from the outside! In case of injury seek hospital
immediately! Infection risk!
(4) Before working on the hydraulic system, lower the devices, depressurize the system
and switch off the engine!
Attention:
The hoses of the hydraulic cylinders must be renewed by a specialist workshop
or the CLEMENS customer service at least every five years.
Attention:
There are crushing and shearing points on power-operated parts (eg
hydraulic)!
Spraying oil can cause injury and environmental pollution!
Attention:
Keep away from sources of ignition, do not smoke.
Do not mist lubricants.
Store soaked cloths in non-combustible, closed containers.
Attention:
Do not extinguish with water.
In case of fire, there is a risk of bursting of closed, heated containers.
Attention:
Remove spilled hydraulic oil immediately with oil binder and place in designated
waste containers; ventilate the room well.
Caution! Slipping risk on greasy ground.
