S-2R + Frontanbau 11.2018 en
7
3.4.2 Required equipment of the tractor
a) Hydraulics
The tractor must have a single acting control valve (for single acting lift cylinder)
or a double acting control valve (for double acting lift cylinder).
b) Dimensions and weights
The manufacturer's maximum front axle load must never be exceeded.
3.4.3 Attachment points to frames made by CLEMENS:
For information about which frames and brackets can be attached to the lifter,
contact your dealer or CLEMENS Customer Service.
3.4.4 Technical data
Type:
S-2R
Weight
(without accessories)
approx. 56 kg
(approx. 123 lb)
Length x Width x Height
(dimensions outside edges,
retracted state, without
accessories)
approx.120x420x920 mm
(approx. 5“x17“x37“)
height adjustment
0-500 mm
(0-
20”)
max. lifting load front:
for lateral mounting
600 kg (1322 lb)
150 kg (330 lb)
lubricant
sulfur-free grease
oil pressure
175 bar
4 Safety instructions
4.1 General
(1) Check the device and the tractor for traffic and operational safety before each use!
(2) In addition to the instructions in these operating instructions, observe the generally
applicable safety and accident prevention regulations!
(3) The warning and information signs attached to the device provide important
information for safe operation; the attention serves your safety! The instructions must
be kept in a perfect, legible condition!
(4) Familiarize yourself with all equipment and actuators and their function before starting
work. During work it is too late!
Compliance with the safety instructions is mandatory.
