S-2R + Frontanbau 11.2018 en
5
3 Introduction
3.1 General description and purpose of the device
The working principle of the column lifter is that a single-acting hydraulic cylinder raises or
lowers your implement when the hydraulics are applied from the driver's seat. The maximum
stroke of the hydraulic cylinder is 500 mm
(20”). Optionally, the S-2R can also be converted
to double-acting hydraulic operation (see note in chapter 10.5).
The
CLEMENS column lifter S-2R
consists essentially of the following components:
Figure 1 General view column lifter S-2R
Attention:
In this operating manual, all points concerning your safety are marked with this
symbol. Observe the instructions and pass on all safety instructions to other
users!
Note:
This symbol indicates special additional information.
Observe the instructions
and pass on all safety instructions to other users!
column
sliding element
lifting cylinder
with hydraulic hose
Column
Lifting cylinder
with hydraulic hose
Sliding element
