background image

27/05/2020 

 

 

Page 10 

 

Warranty 

The Cleaver Scientific Ltd. (CSL) units have a warranty against manufacturing 
and material faults of twelve months from date of customer receipt. 

If any defects occur during this warranty period, CSL will repair or replace the 
defective parts free of charge.  

This warranty does not cover defects occurring by accident or misuse or de-
fects caused by improper operation. 

Units where repair or modification has been performed by anyone other 
than CSL or an appointed distributor or representative are no longer under 
warranty from the time the unit was modified. 

Units which have accessories or repaired parts not supplied by CSL or its asso-
ciated distributors have invalidated warranty. 

CSL cannot repair or replace free of charge units where improper solutions or 
chemicals have been used. For a list of these please see the Care and 
Maintenance subsection. 

If a problem does occur, then please contact your supplier or Cleaver Scien-
tific Ltd: 

Cleaver Scientific Ltd. 

Unit 41, Somers Road Industrial Estate 

Rugby, Warwickshire, CV22 7DH 

Tel: +44 (0)1788 565300 

Email: 

[email protected]

 

Содержание CSL-CELLAS











Отзывы: