ClearWater Zodiac LM2-24, Руководство пользователя

Страница: 10 / 32

10
HOW YOUR CLEARWATER CHLORINATOR WORKS
How your Clearwater
Chlorinator Works
Common salt (sodium chloride) is made up of two elements, sodium and chloride.When your
Clearwater LM2 is installed, a measured quantity of salt is dissolved in the pool water to make
it slightly salty. As part of the daily filtration cycle, the pool water is passed through the
Clearwater electrolysis cell to produce chlorine which is dissolved instantly into the water.
Your Clearwater LM2 also produces ozone in the cell as a by-product.
In simple, non-technical terms, the chlorine instantly starts to destroy bacteria, viruses and
algae, and in doing this reverts to dissolved salt.This cycle continues with more new chlorine
being produced from the salt water in the electrolysis cell, sanitizing the pool, and changing
once more back to dissolved salt.
Everyday, when the Clearwater unit and the filtration system are switched on, dust and
debris are trapped by the filter and the Clearwater sanitizes the water to make if safe
and sparkling clean.
Important.
To ensure your LM2 works at maximum efficiency, regularly check and maintain the chemistry
of your pool.
Preferred Water Chemistry Readings
Salt concentration 4,000 ppm
pH 7.2 to 7.6
Chlorine stabilizer (Cyanuric acid) 40 to 100 ppm
depending on regional climate
Total alkalinity 80 to 120 ppm
Total hardness 200 to 400 ppm
Free chlorine 1 to 3 ppm