ClearView Panther-16HP Скачать руководство пользователя

Страница: 231 / 270

183

5.8.5.6 Account

Note:



For the character in the following user name or the user group name, system max

supports 6-digits. The space in the front or at the end of the string is null. The valid

string includes: character, number, and underline.



The user amount default setup is 64 and the group amount default setup is 20. The

factory default setup includes two levels: user and admin. You can set the

corresponding group and then set the rights for the respective user in the specified

groups.



User management adopts group/user modes. The user name and the group name

shall be unique. One user shall be included in only one group.

5.8.5.6.1 User name

In this interface you can add/remove user and modify user name. See Figure 5-84.

Figure 5-84

Add user:

It is to add a name to group and set the user rights. See Figure 5-85.

There are four default users: admin/888888/666666 and hidden user

“default”. Except

user 6666, other users have administrator right. The user 666666 can only have the

monitor rights,.

Hidden user

“default” is for system interior use only and can not be deleted. When there is

no login user, hidden user

“default” automatically login. You can set some rights such as

monitor for this user so that you can view some channel view without login.

Here you can input the user name and password and then select one group for current

user.

Please note the user rights shall not exceed the group right setup.

For convenient setup, please make sure the general user has the lower rights setup than

the admin.

Содержание Panther-16HP















































































































































































































































































Результаты поиска

Содержание Panther-16HP

Отзывы:

Похожие инструкции для Panther-16HP

Бренды по названию

Популярные бренды

ClearView Panther-16HP, Быстрый старт

Результаты поиска

Содержание Panther-16HP

Отзывы:

Похожие инструкции для Panther-16HP

Бренды по названию

Популярные бренды