3
Revision date: 09.30.10
Important Information
ASSEMBLY PROCEDURE
Following the instructions as presented will help ensure
the proper assembly of your end frame. The steps
outlining the assembly process are as follows:
1. Verify that all parts are included in the shipment.
Notify Customer Service for questions or concerns.
2. Read these instructions, the Must Read document,
and all additional documentation included with the
shipment
before
you begin assembling the end
frame.
3. Gather the tools, bracing, ladders (and lifts), and
assistance needed to assemble the end frame.
4. Check the weather
before
you install the end frame
panel (if equipped).
Do not install end panels on a
windy or stormy day. Additional purchase required.
5. Assemble the end frame.
6. Read the care and maintenance information at the
end of these instructions.
7. Complete and return all warranty information as
instructed.
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the end frame.
Additional tools and supports
may be needed depending on the structure, location, and
application.
• Tape measure or measuring device
• Fine point marker to mark the location on tubing.
• Variable speed drill and impact driver (cordless with
extra batteries works best)
• Metal file and metal-cutting saw
• Wrenches and impact socket set
• Scissors or utility knife
• Hammers, gloves and eye protection
• Adjustable pliers and self-locking pliers
• Ladders, work platforms, and other machinery for
lifting designed to work safely at the height of the
building and end frame.
ATTENTION:
Consult the services of a qualified,
professional contractor if you are not familiar with the
construction of similar frame structures.
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts
before
you begin to assemble the end
frame.
1. Unpack the contents of the shipment and place where
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets.
2. Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you have
questions, consult the parts guide on the next page
and all diagrams for clarification, or contact customer
service.
NOTE:
At this time, you do not need to open the
plastic bags containing smaller parts such as
fasteners and clamps.
QUICK START DIAGRAMS
For a quick overview of the end frame and its
components and accessory installation, consult the
diagrams at the back of these instructions.
Cutting the Vertical Supports to Length
This end frame kit is equipped with 2.375 pipe for the
vertical supports. In some instances, these pipes are
connected and cut to the required length.
Cut only the
plain end of the assembled pipe.
The tapered or swaged end of the vertical support
is positioned at the top of the support. It is designed
to fit into the underside of the roll-form rafter where
it is secured using the supplied fasteners. WHEN
CUTTING PIPES TO LENGTH, DO NOT REMOVE
THE SWAGED END OF ANY VERTICAL SUPPORT
PIPE.
Hat Channel (108529)
Use the 108529 hat channel for the end wall frame
only. Do not use this hat channel on the main building
frame. Consult all instructions for details.
IMPORTANT:
Hat channel used for the main building,
includes pre-punched mounting holes;
the 108529 hat
channel does not.
End frame diagrams throughout this manual may
show hat channel that differs slightly in appearance
when compared to the 108529 hat channel. Disregard
this difference and install the 108529 hat channel as
instructed.
