ClearOne COLLABORATE LIVE 200, Руководство пользователя

Страница: 64 / 100

64 |
C O L L A B O R A T E L I V E : U s e r G u i d e
Note: Changing this setting cause COLLABORATE® Live to reload.
RTP Ports:
•
From
– Enter the minimum RTP value.
•
To
– Enter the maximum RTP value.
Note:
In COLLABORATE® Central mode, the system administrator should
configure the LDAP settings for COLLABORATE® Central on the server side.
To verify that COLLABORATE® Central mode is active:
1. Press Status on the remote control and check in the displayed information that a
2. COLLABORATE® Central icon appears.
3. Select Settings>Advanced>H.323 and check the displayed information. The New Call IP
number shows the extension number that the system received when initiating
COLLABORATE® Central mode, which is the ID number.
WORKING IN COLLABORATE® CENTRAL MODE
In a point-to-point call and when COLLABORATE® Central mode is active, you can add
another participant to the call without hanging up, i.e.
– the call continues while the additional
participant is being invited.
To add participants to the call in COLLABORATE® Central mode:
1. Select Conference>Invite . The Invite call window is displayed.
Note:
The COLLABORATE® Central >Invite option is available on the menu only
when COLLABORATE® Central mode is active.
1. Type in the participant COLLABORATE® Central alias/IP number, and select Invite . The
call is connected.
SIP PROTOCOL SETTINGS
SIP is a common communication signaling protocol for VoIP.
To configure SIP settings:
1. Select Settings>Advanced> SIP. The SIP Settings window appears.