14)
For Sureseal trays the Door and Return Panels should be close to the inside edge of the tray’s upstand
as possible
For other applica ons, check that the doors are parallel with the front edge of the tray.
13)
Li the Door up and fit it into the Return Panels taking care to hold it above the front lip of the tray (You
will note that as you slide the door onto the Returns , the Return Panels will self align to the inside of
the upstand on the tray) Once the Door and Returns are fully engaged let the Door slide gently down
inside the upstand of the tray. Do not remove the door se ng block, this will assist in suppor ng the
door during installa on and se ng the correct clearance from the sill
You can now remove the packers from under the Return Panels and allow them to slide gently down
onto the tray.
15)
Adjust the Door set ensuring the corner posts line up with the corners of the tray and that they are
si ng plumb and level.
