7)
Fit the Return Sill to the lower edge of the
Return Panel. Carefully wipe away any
excess silicone that may ooze out
11
)
Fit the handle to the door (where required). This
will assist in the opening & closing during the in-
stalla on process
Ensure to fit the plas c washers and bush to prevent
metal on glass contact
8) Place 25-50mm Wood packers on the
tray (not supplied)
9)
Posi on the Return Panel into the Return Wall
Receiver.
11
)
Repeat steps 5 – 10 for the adjacent Return Panel
10
)
Slide the return Panel down onto the
packers
12
)
Carefully swing the Return Panels outwards
Door Installa on
