9
YOURx-Aerial Terminal
__________________________________________________________
Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
Manual 019588 REV B - Sept 2018
Preparing FlexPorts for Drops
Step 1
: Using pliers, remove the tab from the
desired port by bending and breaking the excess
plastic away.
Step 2
: De-burr (using a de-burring tool/snips/
knife) the port hole for a smooth transition, helping
to prevent damage to the fiber when it enters the
port.
Supports all FieldShield Drop Options
The terminal is available in a 6, 12 or 24 port drop
configuration.
•
Ports 1-12 will be on the left end plate, typically
closest to the serving pole (unless specified
differently, at ordering).
•
Ports 13-24 on far end endplate
Useable FlexPorts will be marked with a silver “X”
on the inside of port tab, indicating that a FlexPort
has been installed and capable of accepting a
water tight FlexConnector or microduct.
End Plate Interior
End Plate Exterior
