Clearfield FieldSmart 144, Руководство по установке, Страница: 27 / 46

27
FieldSmart
®
Fiber Distribution Hub (FDH)
__________________________________________________________
Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • techsupport@clfd.net
Manual 019703 REV B - March 2019
7. In order to swap grommets,
remove the dome nut from
the sealcon and pry the
current grommet out, being
careful not to damage the
compression fitting. Push the
new one in to place. Ensure
new grommets are installed
with the tapered side up (see
pictures).
Note: It is sometimes easier
to remove the grommet by
using a blunt ended tool to
push at it from the bottom,
inside the sealcon. Take care
not to damage the grommet.
2 1
6 5 4
3
Ensure the O-ring on the underside of the sealcon is present before installation.
Loosen, or if needed, remove the dome nut on the sealcon to allow the cable to fit through the internal sealing grommet.
Note: If utilizing a strength member clamp, insert the cable through the clamp before the sealcon.
8.
9.
O-Ring