manualshive.com logo in svg

Clearfield FieldSmart 144, Руководство по установке, Страница: 19 / 46

Поделиться
Скачать
Clearfield FieldSmart 144 Скачать руководство пользователя страница 19

19

FieldSmart

®

 Fiber Distribution Hub (FDH)

__________________________________________________________

Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected] 

Manual 019703 REV B - March 2019

Mount the cabinet base to the concrete pad per your local practice.

If the base is installed on the enclosure, remove the base by removing the 4 bolts from the bottom of the inside of the 

cabinet. Position the enclosure base onto the pad (typically concrete). Assure that the 4 anchor locations in the enclosure 

base align with the anchor locations in the pad. After verification of the anchor alignment, mount per your local practice.

Note: 

Anchors are supplied by the customer, to comply with local rules and regulations.

Optionally, you may choose to use the round cut outs for more flexibility in mounting the base. Place the rectangular washer 

plates (found in the hardware package) onto the enclosure base, aligning the holes with the anchor locations in the pad (or 

placing over cast-in-studs). Orient the plates to provide the most contact with the base flange. Install the chosen fasteners 

and tighten firmly.

Mounting Base on Concrete Pad

Содержание FieldSmart 144















































Отзывы:

Нет отзывов