manualshive.com logo in svg

Clear-Com Tempest2400, Справочное руководство

Reference Manual для Clear-Com Tempest2400 доступен для скачивания бесплатно на нашем сайте. Этот удобный мануал поможет вам разобраться с функциями и настройками продукта. Скачайте его с manualshive.com прямо сейчас, чтобы получить всю необходимую информацию.

Поделиться
Скачать
background image

Clear-Com® 

 

 

 

 

 

 

 

 

 

 

 

Tempest®2400 2-Channel Wireless Intercom System 

 

 

 

 

 

 

 

               67

Update the Firmware (with CodeUpdater)

Tempest  firmware  updates  are  released  periodically 

and equipment should be updated to maximize optimal 

system performance.    Staying up to date with the latest 

firmware  insures  that  your  system is  equipped  with  the 

newest features and enhancements that Tempest has to 

offer.

Tempest  uses  a  proprietary  program,  CodeUpdater,  to 

update firmware in the BaseStation and the BeltStation.  

Tempest  CodeUpdater  can  automatically  detect  what 

firmware  is  currently  installed  on  a  unit  and  indicate 

whether a later version  is available.   

Note:  You must have 

internet access on your PC for CodeUpdater to accurately detect the 
latest released versions available.

Connecting Your BeltStation for Updating:

• 

Be sure the BeltStation is powered OFF.

• 

Plug in your USB programming cable to your computer first.

• 

Push and hold the CALL button on the front of the BeltStation and plug in the USB cable to the side USB-A 
connector on the BeltStation. The BeltStation will power ON automatically. Do not release the CALL button until 
the BeltStation display message appears.

Connecting Your BaseStation for Updating:

• 

Be sure the BaseStation is powered OFF.

• 

Plug in your USB programming cable to your computer and into the front USB-B on the BaseStation.

• 

Push and hold the MIC KILL button on the BaseStation front panel and then power ON. Do not release the MIC 
KILL button until the BaseStation display message appears.

Updating Firmware:

• 

Open Tempest CodeUpdater.

• 

Connect the device. CodeUpdater will list the model of the equipment connected next to Device.

• 

You may be prompted to update Bootloader firmware.  If so, it is highly recommended that you do update 
it. When updating the Bootloader it is very important that you not interrupt the update. Be sure USB cable 
is securely connected before starting upgrade process. Interrupting the update may require the device to be 
returned to the factory for re-programming.  

Note:  If you update the Bootloader you will have to re-connect your device to 

initialize the process again.

• 

The “Current Version” of firmware will display in CodeUpdater along with the “Latest Version” available (if 
applicable). 

Note: The PIC firmware version is only applicable to the BaseStation firmware.

• 

If an update is available check the box under “Upgrade Selection” and click the <Upgrade> button.

• 

Repeat these steps as needed for each Tempest unit.

Содержание Tempest2400







































































































Отзывы:

Нет отзывов

Похожие инструкции для Tempest2400

Vandersteen Audio SEVEN Operation Manual preview
SEVEN
Бренд: Vandersteen Audio Страницы: 20
Toa F-2322CU2 Instruction Manual preview
F-2322CU2
Бренд: Toa Страницы: 16
Midland BT SKI ACTION Instruction Manual preview
BT SKI ACTION
Бренд: Midland Страницы: 75
Optimus MP-A1 Quick Manual preview
MP-A1
Бренд: Optimus Страницы: 2
Bticino 323004 Quick Start Manual preview
323004
Бренд: Bticino Страницы: 2
GE MERLIN 1255052 Installation And Maintenance Manual preview
MERLIN 1255052
Бренд: GE Страницы: 28
Laser SPK-F60 User Manual preview
SPK-F60
Бренд: Laser Страницы: 9
Pyle PSUFM1280B User Manual preview
PSUFM1280B
Бренд: Pyle Страницы: 8
National Instruments SC-2061 User Manual preview
SC-2061
Бренд: National Instruments Страницы: 77
Behringer CL3564 Quick Start Manual preview
CL3564
Бренд: Behringer Страницы: 20
HOLOVISION 400-W-TES2 Installation Instructions preview
400-W-TES2
Бренд: HOLOVISION Страницы: 4
AES global 603 DECT Manual preview
603 DECT
Бренд: AES global Страницы: 16
Parrot Products LE1001 Operation Manual preview
LE1001
Бренд: Parrot Products Страницы: 8
Valcom V-2900 User Manual preview
V-2900
Бренд: Valcom Страницы: 4
LEM T5A Owner'S Manual preview
T5A
Бренд: LEM Страницы: 18
Topp Music Gear TRANS-PORT Operation Instructions Manual preview
TRANS-PORT
Бренд: Topp Music Gear Страницы: 8
KYE Systems Corp. Genius SW-S2.1 900 Service Manual preview
Genius SW-S2.1 900
Бренд: KYE Systems Corp. Страницы: 16
Ubiquiti AIR FIBERAF24 User Manual preview
AIR FIBERAF24
Бренд: Ubiquiti Страницы: 42

Бренды по названию

Популярные бренды

Загрузить еще бренды