Clear-Com Tempest2400, Справочное руководство

Страница: 65 / 102

Clear-Com®
Tempest®2400 2-Channel Wireless Intercom System 57
Pairing with a BaseStation
Pair BeltStation to BaseStation:
Confirm that the BaseStation is powered ON and in Operational Mode (not
in Menu Mode) and that the BeltStation is powered OFF. Confirm that the
BaseStation’s Network Number and Lockout Key are adjusted as needed.
See the
section on Set Network Number and Lockout Key.
Plug one end of the pairing cable into the BaseStation and the other end into the
BeltStation.
The pairing cable is a standard 3.5mm
(1/8 in.) male to male stereo patch cord.
Turn the BeltStation power ON by pressing and holding the BeltStation Power ON/OFF
button for two seconds. The pairing process will begin automatically. Watch for the message “Pairing Complete” to appear
briefly on the BeltStation display. The BeltStation will automatically re-initialize.
Adjust BeltStation Slot
The BaseStation Slot Assignment only affects the order that the BaseStation Operational screen displays BeltStation
information when the BaseStation is in the Static display mode. If the BaseStation is routinely used as a communication
port or for monitoring BeltStations, it may be more convenient to always have the same user appear in the same position
on the BaseStation display. This is a personal preference setting.
In the BaseStation “Tech Menu,” choose Static or Dynamic from the “Display Slot Assignments” screen. Dynamic , the default,
will work without any adjustment, and always displays BeltStations in alpha-numeric order by name.
Static
will be the preferred choice for users who are using only one BaseStation and want to ensure that a BeltStation that is
logged in will always appear in the same location (slot) on the BaseStation display. When selecting
Static
slot assignments,
you must also enter the Tech Menu for each BeltStation and assign each BeltStation a different slot (1 – 5).
The BaseStation default is for
Dynamic
Slot Assignment. This means that when BeltStations log in to a base, the information
about the BeltStations is displayed on the BaseStation LCD screen in alpha-numeric order according to the name of
the BeltStation. For example, “Dir” appears before “Light1,” which appears before “StgMgr,” but they can change slots
depending on which BeltStations are turned ON. If the default settings are used, nothing is necessary. If the BaseStation
is located in an equipment room and is not routinely used as a communication port or to manage BeltStations, nothing is
necessary.
Adjusting so that each BeltStation always appears in the same position of the BaseStation display is a two step process:
1. Advance to the BaseStation’s “Display Slot Assignment” section of the “Tech Menu” and select Static .
2. In each BeltStation, advance to the “Base Slot” section of the “Tech Menu” and adjust each BeltStation to a different
slot (1 – 5). The BeltStation designated to slot 1 will always appear on the far left of the BaseStation display, with slot 2
appearing in the next position to the right, and so on.
In
Static
Mode, if a BeltStation is not turned ON, or is logged out due to being out of range, the BaseStation LCD will
display a very obvious “X”, making it easy to see at a glance, which BeltStations are currently active.
A Multiple BaseStation system that uses iSelect Roaming must choose to use “Dynamic” slots to ensure that BeltStations
can move from BaseStation to BaseStation when roaming.