Clear-Com Tempest2400, Справочное руководство

Страница: 33 / 102

Clear-Com®
Tempest®2400 2-Channel Wireless Intercom System 25
Auxiliary Input/Output
Auxiliary IN can be used to bring program or other audio into the Tempest BaseStation. Audio supplied to the Aux IN Con-
nector can be assigned to any combination of the two intercom channels with individual volumes for each channel at the
“Aux In/Out Assignment/Level” menu. Audio from the Aux IN port is routed only to wireless users and is not routed out to
the hardwired system.
Audio from the Auxiliary OUT Connector can be assigned from any combination of the two intercom channels with Vol-
ume control at the “Aux In/Out Assignment/Levels” menu.
While in the “Aux In/Out Assignment/Level” menu, the front panel Channel Select (SEL) button is used to advance
through the channels, and the IN Level Control is used to adjust the Aux IN volume. The OUT level control is used to ad-
just the Aux OUT volume. Adjust to the lowest level to restrict audio from a channel.
Audio levels are expressed in Decibels (dB). The audio range for Aux IN/OUT are:
» IN: -15.5 dB to +4 dB
» OUT: -12 dB to +8 dB
The Aux IN and OUT connectors are ¼” Tip/Ring/Sleeve jacks that accept standard ¼” TRS plugs. The Aux IN and OUT con-
nections are balanced and transformer isolated and operate at a nominal line level audio of - 4 to + 8 dBu.
Reset Memory
There are three options to reset memory:
Restore Factory Default
,
Clear Memory
, and
Reset Radio Settings
. Both the
BaseStation and each BeltStation has a “Factory Default” option in the “Tech Menu.” Browse to the “Tech Menu,” select
“Factory Default,” and choose either of the three options. From the BaseStation, “Restore Factory Defaults” only resets
BaseStation defaults. BeltStation factory defaults can be reset in each BeltStation and changes are relayed wirelessly to the
BaseStation.
Restore Factory Default
This option will restore all settings to factory defaults except pairings and names.
Clear Memory
Occasionally, it may be desirable to remove all previous settings and user defined names, such as when equipment is
transferred to a new project or work site. Clear Memory on a BeltStation or a BaseStation will require re-pairing of
BeltStations. It may be necessary to select a Frequency Band due to country specific RF requirements, on the
BaseStation.
Reset Radio Settings
This is a BaseStation feature only. Selecting this option will only reset the Frequency Band to “1”, the Network
Number to “0”, and the Lockout Key to “255”. The BeltStation radio settings are determined by the BaseStation.
Be aware that restoring factory defaults will have an immediate effect on volume, sidetone,
relay selection, Aux In/Out levels, hardwired intercom levels, and Shared Slot settings,
among others.
This option will restore all settings to factory defaults and will delete all user defined names.
All entries will be deleted and there is no “undo”.