background image

Page 31 

 

 

 

 

 

Term 

Definition 

Panel 

Any intelligent intercom device connected to the rear-panel 

analog ports of the central matrix. This term does not refer to 
devices connected through interface modules. 

Partyline 

A wired shared communication system based on a single 
screened pair of wires. See the Encore range. Matrix requires 
the CCI-22 to interface to it.  

Port 

Any of the input/output connections (RJ-45 connectors) on the 
back panel of the central matrix. These connectors and the 

attached cables connect the central matrix to remote intercom 
devices. The term port emphasizes that the connection is a 

portal between the central matrix and the remote intercom 
devices.  

Program 

Any separate audio source that is fed into the intercom 
channels. In television applications, for example, the program 
audio is the audio that is broadcast on air. 

Rack Unit (RU) 

Standardized unit of mounting space on a rack panel. Each rack 
unit is 1.75 inches (44.45 mm) of vertical mounting space. 

Therefore 1 RU is 1.75 inches (44.45mm) of vertical mounting 
space, 2 RU is 3.5 inches (88.9mm), 3 RU is 5.25 inches 

(133.35mm), and so on. 

Remote panel 

Any intelligent intercom device connected to the back-panel 
ports of the matrix. This term does not refer to devices 

connected through interfaces. 

Sidetone 

The sound of the panel operator’s voice, as heard in their own 

earphone(s) as they speak. 

Source 

In this guide, the term source refers to a device (such as an 
intercom panel, interface, or beltpack) that sends audio into 
the matrix. The device to which audio is sent is called a 

destination.  

Virtual IFB 

A new IFB model included in Eclipse 8.7 and above. 

VOX 

In the Eclipse system, when audio at a panel exceeds a 
threshold, a light is activated 

at the panel’s port card to 

visually cue the operator. The threshold level is set in the EHX 

configuration software. 

V-Series 

User panels used with Eclipse systems, providing advanced 
intercom facilities. Available in rack mount and desktop 
formats. 
i-Series user panels are also supported (see above). 

 

Содержание Eclipse ICS 1008E






































Отзывы: