Clear-Com Eclipse ICS 1008E, Руководство пользователя

Страница: 9 / 37

Page 9
waiting tally can be cleared either by answering the call or by letting the answer-
back, auto-clear time, which is set in the configuration program, lapse.
If another panel calls a panel without a button programmed for that label, it will
be placed in the answer-
back stack (see “Removing Labels From the A nswer-Back
Stack” on page 1 -5).
In-Use Tally Indicator
If a talk/listen button is assigned to a label and another panel is currently using
that label, the button will double-flash once per second to indicate the label is in
use. This tally must be specifically enabled from the configuration software.
Telephone Off-Hook Tally Indicator
When a telephone interface is assigned to a talk/listen button, the button will
flash once per second if that telephone is off the hook. This tally must be enabled
from the configuration program.
Radio Receiver Active Tally Indicator
When a two-way radio interface port is assigned to a talk/listen button, the button
will flash once per second when that radio’s receiver is active. This tally must be
enabled from the configuration program.
Panel Connected Tally Indicator
This tally is used when a panel is connected to the frame by a high-speed data
line (such as an ISDN or T1 line) that might be
inactive periodically. The talk/listen button for any such panel will flash once per
second when any such panel is on-line. This tally must be enabled from the
configuration program.
Answer-Back Facility
The “Ans Back” button is used to answer calls to a panel from other panels or
interfaces not assigned to a that panel’s talk/listen butto
ns. When these calls
arrive:
 The “Ans Back” button will flash bright red.
 The calling panel’s label will be temporarily assigned to the panel’s “Ans
Back” button.