Page 22
3.2.3
The panel appears to activate talk paths, but other panels
can’t hear the panel operator
1)
Check “Mic
On/Off” and “Panel Mic” buttons to ensure the intended
microphone is selected and on.
2)
If the correct microphone is turned on, ensure the panel audio has not
been muted externally through the logic inputs.
3)
Make sure the panel has not been defined as a nearby panel.
4)
Enable eavesdropping on the panel.
5)
Test the integrity of the panel’s audio path by temporarily setting a forced
listen to it.
6)
Reset the panel.
7)
Replace the panel.
3.2.4
No audio from the panel’s speaker
1)
Ensure the “Intercom” knob on the panel’s front pa
nel is turned up.
2)
Ensure the “Speaker” button is on.
3)
Check whether audio can be heard in a headphone.
4)
Test the integrity of the panel’s audio path by temporarily setting a forced
listen to it.
5)
Reset the panel’s matrix card in the Matrix frame.
6)
Replace the
panel’s matrix card in the Matrix frame.
7)
Reset the panel.
8)
Replace the panel.
Содержание Eclipse ICS 1008E
Страница 25: ...Page 25 Figure 3 2 Block diagrams...
