Page 12
4)
Push the appropriate talk/listen button programmed as a listen or talk
with listen. The selected button will turn bright yellow and the
programmable buttons with the up and down arrows will turn dim yellow.
5)
Use the up and down arrows on the programmable buttons to increase (up
arrows) or decrease (down arrows) the crosspoint volume of the selected
listen or talk with listen button.
6)
To exit, push the “Listen/Call” button or wait for
the 3 sec. time-out.
Listen Level Reset
To reset the listen level:
1)
Push (for less than 1 sec.) and quickly release the “Listen/Call” button to
activate the listen-
level mode. The “Listen/Call” button will turn bright
yellow and the active talk/listen buttons programmed with listen and/or
talk with listen will flash.
2)
Push and hold the “Listen/Call” button for 3 sec. to reset the listen level
settings to the default. The active talk/listen buttons programmed with
listen and/or listen with talk will stop flashing and all the programmed
talk/listen buttons will return to their previous states.
3)
Release the “Listen/Call” button.
Call Signals
To activate call signals:
1)
Push and hold the “Listen/Call” button until it is
dim yellow (at least 1
sec).
2)
Push the talk/listen button programmed with a talk or talk with listen of
the desired destination’s label. The call signal will be sent each time the
destination’s talk/listen button is pressed.
3)
The call-signal mode will time-out after 5 sec. of button inactivity or can
be deactivated by pressing the “Listen/Call” button.
Call signals can be issued to any talk or talk with listen destination assigned to a
panel’s talk/listen buttons. If more than one label is assigned to a button, all
Содержание Eclipse ICS 1008E
Страница 25: ...Page 25 Figure 3 2 Block diagrams...
