Clear-Com Eclipse ICS 1008E, Руководство пользователя

Страница: 8 / 37

Page 8
Panel Microphone Connector
This connector allows panel operators to use a panel microphone (see “Panel Mic”
on page 1-5). Plugging in a panel microphone will initially cause the panel to
switch to panel-microphone operation and will turn the headset microphone off.
Headset Connector
The headset connector provides a front-panel connection for a headset. Plugging
in a headset will initially cause the panel to switch to
headset-microphone operation and will turn the speaker off. Unplugging the
headset will cause the panel to switch to panel-microphone operation and will turn
the speaker on.
Talk/Listen Buttons
Each talk/listen button can be programmed through the configuration program or
an appropriately configured ICS-2008E Master Intercom Panel as a talk (red),
listen (yellow), or talk with listen (red). The button color will be dim to indicate it
has a programmed label and is available for selection. When selected it will
become bright to indicate it is active.
Following are descriptions of what the panel’s other indicators mean.
Communication-Error Indicator
If the ICS-1016E/ICS-1008E should lose data communication with the matrix
frame, the talk/listen buttons will flash bright red at a slow rate. When data
communication is restored, the panel will automatically return to normal
operation.
Monitoring/Eavesdropping Indicators
If any other panel begins monitoring a panel, a beep (the monitoring-alert tone)
will sound at the panel.
To inhibit the monitoring-
alert tone, use the “Configure - Local Preferences” menu
in the configuration program.
Call-Waiting Indicator
If a panel calls another panel with a button programmed for that label, the button
will rapidly flash bright red. This flashing is a call-waiting tally. To answer the
incoming call, push the indicated talk/listen or the “Ans Back” button. The call -