Cleaner Wash 5411074176396, Оригинальное руководство пользователя

Страница: 26 / 39

WARNING! Inadequate extension cords can be
dangerous. If an extension cord is used, it shall be
suitable for outdoor use, and the connection has to
be kept dry and off the ground. It is recommended
that this is accomplished by means of a cord reel
which keeps the socket at least 60mm above the
ground.
WARNING! In order to avoid a hazard due to
inadvertent resetting of the thermal cut - out, this
appliance must not be supplied through an external
switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the
utility.
Warning symbol: Machine not suitable for
connection to the potable water mains.
WARNING! The machine is intended to be used at
a temperature above o degree. (Only for machine
with power cord of H05VV - F).
WARNING! To ensure the machine safety, please
only use original spare parts (including nozzle) from
the manufacturer or approved by the manufacturer.
Do not use the machine before you changed them if
they are damaged.
WARNING! Be care of the danger of the kickback
force on the spray assembly when opening the
trigger gun and grasp the gun with hands firmly.
WARNING! When the machine is moving and
installing, the machine must be in flat. When moving
the machine, pulling the handle to move it.
WARNING! Connect to the water supply.
The machines are not suitable for connection to
potable water mains.
Connect the machine to the water supply. (It can be
a water container).
Make sure the inlet water pressure keeps between
0.01MPa and 0.4MPa.
The inlet pipe should at least 5 M long. Do not use
the pipe if the pipe is damaged.
If you want connect this machine to portable water
mains, you must install a backflow preventer in the
water pipe to prevent dirty water flow back to the
drinking water system. The backflow preventer shall
comply with EN 60335
-
2
-
79 ANNEX AA.
WARNING! Disconnect from the electrical power
supply before carrying out user maintenance.
If the mains cable is damaged it must be replaced
by the manufacturer, or its service agent or similarly
qualified person to avoid a hazard.
Connection
1. Attach the high pressure hose to the pressure
water outlet of the machine.
2. Attach the spray handle to the high pressure
hose. Prior to operating the machine please ensure
that the high pressure hose has been completely
uncoiled. Whilst the machine is in operation the
hose MUST not loop.
3. Mount the nozzle or any other equipment you
want to use.
4. Connect the machine to the water and power
supplies.
INSTALLATION, ELECTRICAL AND WATER
CONNECTIONS
1. pressure cleaner 2. water supply hose
3. water connection 4. water inlet
5. high pressure tube
6. water outlet(backside)
7. spray gun 8. power supply
* No. 2, 3, 8 are not included