Disposal, recycling of used device
DWS - Series | Version 1.03
15
11.2 Maintenance and repair
If the water pump does not work properly, contact a de-
aler or our customer service. The contact details can be
found in chapter 1.2 Customer Service.
All protection and safety equipment must be reinstalled
immediately after completion of repair and maintenance
work.
Regular maintenance and careful care reduce the risk of
possible malfunctions and help extend the life of your
device.
Make sure that the water pump is switched off before
carrying out any maintenance or repair work.
Regular maintenance and careful care reduce the risk
of possible malfunctions and help to extend the service
life of your device. To prevent possible malfunctions, it is
advisable to regularly check the pressure generated
and the energy consumption. The pre-pressure (air
pressure) in the pressure vessel should also be chec-
ked regularly. To do this, disconnect the pump from the
mains supply and open a consumer in the pressure
line - e.g. a water tap - so that the hydraulic system is no
longer under pressure.
If water flows out of the boiler valve, the membrane is
defective and must be replaced. A high-quality food-
safe diaphragm is available as a spare part. If the de-
vice is not used for a longer period of time, the pump
and pressure vessel should be emptied using the de-
vices provided for this purpose.
12 Disposal, recycling of used device
Please take care in your own interest and in the interest
of the environment that all component parts of the ma-
chine are only disposed of in the intended and permit-
ted way.
12.1 Decommissioning
Immediately decommission disused machines in order
to avoid later misuse and endangering of the environ-
ment or personal safety.
- Eliminate all environmentally hazardous operating
materials from the used device.
- If required, disassemble the machine into easy-to-
handle and usable components and parts.
- Dispose of machine components and operating
materials by the disposal channels provided.
12.2 Waste disposal of electric equipment
Please note that electrical devices contain a variety of
recyclable materials as well as environmentally harmful
components.
You contributes to that these components are disposed
of separately and properly. In case of doubt, please
contact your municipal waste disposal. As necessary, a
specialized waste disposal company can help be used
for the treatment.
12.3 Disposal of lubricants
Please pay attention to an environmentally friendly dis-
posal of the used coolants and lubricants.
Observe the disposal instructions of your municipal dis-
posal companies.
Disposal notes for used lubricants are available from the
manufacturer of the lubricants. If necessary, request the
product-specific data sheets.
ATTENTION!
Maintenance and repair must always be carried out
by qualified personnel; any damages parts can only
be replaced by original spare parts.
