Clean Air CLF 475 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 68

Clean Air CLF 475 Скачать руководство пользователя страница 8

CLF

Laminar crossflow-cabinet

Clean Air Techniek B.V.

UM-CLF-XX-EN05.doc

8

Maintenance and repair of the electrical cabinet

Maintenance shall only be performed by professional electro-technical service engineers, who are
sufficiently trained by Clean Air Techniek B.V. when:

̇

They can estimate and avoid the dangers of the cabinet;

̇

They can estimate the consequences of their actions;

̇

They are sufficiently informed about the operation of the cabinet and the operation of the sub-
systems.

2.4

General safety aspects

1.

The cabinet shall never be used unless the fan is switched into work mode and there is no
alarm.

2.

When the cabinet is not used, the cabinet should be switched in to power-save mode or
closed/covered, to prevent that dust particles etc. from the room can get into the cabinet.

3.

Always try to limit the amount of equipment in the workroom. Each object in the workroom

will disturb the pattern of the airflow and a large number of equipment may lead to serious
disruptions.

4.

It’s is important that the cabinets will be kept clean. Even the smallest contamination which

is not visible will be easily forgotten. It is important to clean often the working area,
especially the work top.

5.

Be careful with flammable liquids such as alcohol. The airflow is in the direction of the

person, so be very careful, or even better; prevent to use this kind of liquids.

6.

The use of hand gloves and over sleeves is recommended.

7.

Always use a chair with the correct height.

8.

Transport and installation of the cabinet is only allowed for authorized staff. Please contact

the manufacturer or the seller of the products

«
...
6
7
8
9
10
...
»

Содержание CLF 475





































































Отзывы:

Нет отзывов