20
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
BEFORE STARTING WORK
All covers including the blade cover guard and side cover must be properly
fitted before switching on.
When working with wood that has been used before, take care to remove all
foreign bodies such as nails or screws etc before cutting.
Always stand the saw on a flat and firm surface.
USE OF THE ON/OFF SWITCH
1. To turn the saw on, press the
green button “I”.
• Wait for the blade to reach its
maximum speed before
making the cut.
2. To turn the saw off again, press
the red button “0”.
NOTE:
The blade will spin for several
seconds after the machine is
switched off.
NOTE:
The blade guard must always be lowered over the workpiece before
you begin work.
CAUTION: BEFORE STARTING UP THE SAW ALWAYS CHECK THE
FOLLOWING POINTS:
1. Is the saw blade firmly tightened and can the blade rotate freely?
2. Are all the locking levers firmly locked?
3. Is the riving knife aligned with the saw blade?
4. Is the blade guard fitted?
5. Make sure that the fences are not touching the blade.
6. Are there any wood pieces jammed between the saw blade and
the table?
7. Have all loose workpieces been removed from the table?
8. Have all the setting tools been removed?
9. Wear protective goggles, ear protection and a dust mask.
Содержание WOODWORKER 6460015
Страница 32: ......
