18
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SLIDING TABLE ASSEMBLY
The sliding table comprises the
following components:
1. Guide Rail
2. Sliding Table assembly
3. Support bracket (x2)
4. Mitre fence
5. Folding Stop Block
6. Fixing Pack
1. Remove the bolts at the top of the
leg and use these to bolt the
support brackets, to the left side
of the table.
2. Bolt the guide rail to the support
brackets using the threaded
holes provided in the rail.
3. Slide the mitre table onto the
guide rail and secure it against
falling off by tightening the lower
bearing against the guide with a
17mm spanner.
4. Fit the fence support to the sliding
mitre table. Fix in place using the
single bolt, into the threaded hole
using a 16mm spanner. Fit the
plastic washers between the
support and table. Do not
overtighten, so that the fence
support can still hinge from side to
side.
Содержание WOODWORKER 6460015
Страница 32: ......
