Clarke Metalworker CL251MH, Инструкция по эксплуатации и обслуживанию

Страница: 7 / 16

PREPARATION
On receipt, carefully unpack the components, ensuring that no damage was
suffered in transit, and that all parts are accounted for.
The following loose items are to be found in the packing case.
Fig. 1
A. Spindle Lowering Lever.
B. Handle.
C. Chuck Key.
D. Plastic Guard.
E. Mounting Bolts w/washers
Check the parts off against the above list.
7
Should there be any deficiencies or damage, you should contact your CLARKE
dealer immediately .
Remove all traces of preservative from the Mill/Drill with a good quality solvent, and
wipe all parts thoroughly with a clean dry cloth. Apply a coating of wax paste or
light oil, to the untreated parts.
Take the necessary precautions when lifting the head
assembly, considering its weight. Assistance may be required.
Before use, the machine must be mounted on to the Variable
Speed Metal Lathe, Model CL250M.
Ensure the location is adequately lit, and that you will not be
working in your own shadow.
In addition to the above, a Drill Chuck is fitted to the spindle.
See Accessories for method of attachment and removal.