Clarke Metalworker CL251MH, Инструкция по эксплуатации и обслуживанию

Страница: 6 / 16

ELECTRICAL CONNECTIONS
WARNING! THIS APPLIANCE MUST BE EARTHED
The machine is fitted with a power cable with a plug attached. The plug should be
connected to the socket at the rear of the Headstock of the CL250M Lathe.
IMPORTANT!
This appliance is fitted with a plug which is moulded on to the electric
cable (i.e. non-rewirable) please note:
The plug must be thrown away if it is cut from the electric cable. There is a
danger of electric shock if it is subsequently inserted into a socket outlet.
If the plug is damaged, a replacement cable complete with plug must be fitted.
These are available form you Clarke dealer (see parts list).
It will be necessary to disassemble the motor in order to fit the replacement
cable. Please note that the wires in the mains lead are coloured in accordance
with the following code;
Green & Yellow - Earth
Blue - Neutral
Brown - Live
WARNING!
DO NOT attempt to fit a replacement cable unless you are fully familiar with
electrical systems. Consult a qualified technician, or your nearest Clarke dealer.
6