Clarke Metalworker CL251MH Скачать руководство пользователя

Страница: 12 / 16

ACCESSORIES

The following accessories are available from your

dealer. When ordering, please quote the

part number shown.

1. Quick Vise

With jaws 50mm wide, maximum opening of
37mm and 15mm deep.

‘T’ bolts with nuts and washers are provided for
mounting to the CL250M Lathe cross slide.

Part Number: 7610743

3. HSS End Mill (2-Fluted)

A set of 6 End Mills, of the following sizes,
for use with the Collet Set (see above)

• 3mm

• 4mm

• 5mm

• 6mm

• 8mm

• 10mm

Part Number: 7601852

2 . Collet Set (MT2)

Part Number: 7601851

A set of 6 Collets for use with the HSS End Mills:

Insert the appropriate Collet into the spindle.

Insert the the draw bolt, provided, into the
spindle, from the top and screw on to the Collet
a few turns.

Insert the appropriate Mill into the jaws of the
Collet, and tighten the draw bolt.

To remove the Collet, unscrew the draw bolt a few turns
and tap its head with a mallet to break the seal
between the Collet and spindle.

NOTE: A hole in the Spindle allows a tommy bar (not
provided) to be inserted so that the spindle may be held
whilst tightening/loosening is carried out.

Draw

Bolt

Содержание Metalworker CL251MH

















Результаты поиска

Содержание Metalworker CL251MH

Отзывы:

Похожие инструкции для Metalworker CL251MH

Бренды по названию

Популярные бренды

Clarke Metalworker CL251MH, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание Metalworker CL251MH

Отзывы:

Похожие инструкции для Metalworker CL251MH

Бренды по названию

Популярные бренды