4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
All fixing bolts should be entered from the outside and secured on the inside
by the washers and nuts provided.
Assembly should be carried out with all nuts finger tight only - DO NOT tighten
the nuts until the structure is fully assembled as described in the instructions.
Assembly may be easier with the help of a second person.
The assembly procedure is as follows:
ASSEMBLE THE FRAMEWORK
The frame comprises left and right-hand side assemblies.
1. Fit the drawer mounting
beam (E) between a front
post (A) and rear post (C)
to create the right-hand
side assembly using nuts(6),
bolts (10) & washers (9).
•
Use the lower set of bolt
holes in the posts for this.
2. Repeat for the left-hand
side assembly using the rear
post (B), front post (A) and
drawer mounting beam
(D).
3. Fit the four side beams (F)
using the higher bolt holes
to complete the two side
assemblies.